How to Wire Lights on a 48 Volt Golf Cart?

Golf is a fascinating sport where a golf cart is a very essential equipment. All the golfers use the golf carts to carry golf instruments to a golf course to play the game. Usually, golf is a game to play in the daytime and players carry golf carts at that time as well. But oftentimes, you may need to connect lights on your golf cart for a lot of reasons. But many of you are not that knowledgeable about that. So, in this article, we have come up with some instructions on how to wire lights on a 48-volt golf cart.


How to Wire Lights on a 48 Volt Golf Cart?

Golf carts are naturally connected with the sport since they are a less-than-usual automated vehicle that allows players to move around the course more easily. Moreover, this amazing vehicle can give your game more mobility and speed up your performance. However, apart from carrying things and moving around, many use this vehicle for evening rides with friends, hunting, or running a nearby river bank. Also, nighttime golf playing is gaining popularity.

This is where you need to wire lights on your golf cart. The thing is that no matter the number of volts your golf cart has, you can wire lights on it. But we frequently get these common inquiries about how to wire lights on a 48-volt golf cart. Before going to the part of the wiring procedure, let’s see what instruments you need to complete the task comfortably:

  • An electric drill
  • A wrench with the size of 9/16-inch
  • Wire stripper
  • Wire crimped
  • Voltage reducer functional on 48-volt golf carts
  • Lighting kits
  • Lights
  • Enough gauge wire to cover the distance
  • Mounting brackets
  • Solderless butt connectors
  • Solderless ring terminals
  • Switch
  • Inline fuse holders
  • Insulated female spade terminal
  • Safety gloves
  • Protective glasses
  • Volt meter
  • Nylon wire ties
  • Electrical tape
  • Screws and a screwdriver

Now, check the below step-by-step guide on how to wire lights on a 48-volt golf cart.

Procedure for Wiring

Step 1

Make sure your engine is not functional and your cart is in tow support mode.

Step 2

Find out the battery of your golf cart and disconnect the positive and negative connections of your golf cart.

If your cart has a series of batteries, find out the starting point of the series and disconnect the negative connections from there.

Step 3

Find out a location for the voltage reducer inside the battery compartment. Install the voltage reducer as directed by the manufacturer. Then secure it by drilling it into the casing of your golf car.

Step 4

With the help of the butt connectors, you should now close the 12-volt cable from the voltage reducer.

This is the place where you are going to connect the wiring of your light too. As a precaution, check with a voltage meter to see if the voltage has already been decreased to 12 volts or not.

Step 5

Reconnect positive and negative connections of the batter and double-check that everything is in the right place and in working order. Faulty wirings could cause major damage to your cart if you don’t double-check everything.

Step 6

Select a place in the cart to mount your lights and their switch. In an ideal environment, lights mounted on the cart’s head provide the best illumination for the users. Taking the help of the mounting brackets, make sure your lights are in place.

Step 7

Drill a hole in a suitable area where you want to install the switch. The measurement of the hole is usually half an inch in diameter, though, the hole’s diameter varies depending on the threaded portion of the switch.

Step 8

Make a connection with one lead end of the inline fuse holder and the power output terminal of the voltage reducer. By utilizing a butt connection, separate the remaining lead end.

Step 9

Extend the opposite end of the inline fuse holder and connect it to the center terminal with a shielded female spade terminal.

Step 10

Connect one end of the gauge wire to the second terminal of the switch. Then connect the other end of the wire to the lights using a butt connector.

Step 11

Use as many nylon wire ties as you need to keep the gauge wire secured in place. Electrical tape should be used to secure the connections.

Step 12

Last but not the least, use screws to secure the alteration. To see if it works, turn the switch on and off.

Final Words

We hope that you are now well aware of how to wire lights on a 48-volt golf cart after reading this article. The approach mentioned above can also be used on golf carts that are powered by 36 volts. If you can properly follow the instructions we have described here, you will be able to wire the lights on your 48-volt golf cart.

About Golf Cart Another Helpful Article: Can Babies Ride in Golf Carts

Leave a Comment